• +41 55 650 20 20
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
Microtunneling_MSS

MSS (Digitization of data capture)

Microtunneling Support System (MSS)

The Microtunnelling Support System MSS supports the tunnelling contractor in the execution of ongoing tunnelling work.
MSS allows centralised, automated storage and management of all data generated during tunnelling (e.g. from the TBM, survey, pipe monitoring, guidance, annular gap lubrication, etc.) and makes this data available quickly and easily in both graphical and numerical form. This allows the tunnelling contractor and the other project participants to carry out versatile and case-related evaluations and analyses of the ongoing tunneling process. MSS has been specifically developed for the needs of pipe jacking and microtunnelling (as well as related processes such as DirectPipe ®) and is characterised by the following main features:
  • Simple and convenient data management.
  • Open system architecture for all available data.
  • Simple and intuitive application.
  • Fast and simple analysis functions.
  • Transparency for all persons involved in the project.
  • BIM compatibility.
  • Simple and convenient work reporting for tunnelling companies.
  • Monitoring of jacking pipes and pressure transfer rings.
MSS has a modular design: While the Basic Package includes basic services that can be applied to almost any Pipe Jacking and Microtunneling project, the other MSS service packages can be activated according to the following overview of project requirements. The Project Manager creates the access portal and controls the access authorisations for the individual user.
MSS
MSS

JCPipe – Quality assurance in pipe jacking / microtunnelling

Adapted to the project requirements and the pipe materials used, Jackcontrol AG provides the optimum monitoring system for every pipe jacking or microtunnelling project. Thanks to a modular design, comprehensive real-time monitoring of the pipe structure during the jacking process is possible for all commonly used combinations of jacking pipe and pressure transfer media. Within the same drive, different pressure transfer media can also be used (so-called hybrid method). For the software set-up,
all current standards used in pipe jacking can be taken into account, e.g. DWA-A 125 and 161, EN 1916, SIA 195, CPAA, PJA, etc.
Comparison of pipe eccentricity for wooden ring (left) and hydraulic joint (right).

Jack Director®

Large angular movements in the pipeline must be avoided, because they result in reductions of the admissible jacking forces. But how should the TBM operator control the drilling equipment so that excessive articulation changes and thus reduced admissible jacking forces can be avoided? The Jack Director ® software module provides valuable support here: Using the measured movements and positions of the steering cylinders of the TBM, the Jack Director ® software evaluates the steering movements of the TBM and compares them with the effective measured joint articulation angles on the subsequent jacking pipes and thus the admissible jacking forces.

MSSTUnIS

After the two long-standing partner companies VMT GmbH and Jackcontrol AG successfully launched the joint tunnel hardware platform MT.connect in 2020, another joint application, MSSTUnIS, was introduced in 2022.

The MSSTUnIS option provides the following advantages to the user:
  • Optimum, intuitively understandable display at a glance for TBM operator.
  • Synergies and cost-saving on the hardware side.
  • Time saving for assembly and commissioning.
  • Full integration of the guidance system into the data management.
  • Optimum jobsite support.

Jack Director®

The Service Package 3D / BIM includes a three-dimensional display of the surroundings of the tunnel to be performed. The 3D model must be provided on site / by the tunnelling contractor, alternatively it can be generated by the CAD designers of Jackcontrol AG for an additional charge. The Service Package 3D / BIM also enables the recording and storage of all documents relating to the jacking pipes in electronic form (Arrow-right BIM attributes; e.g. pipe structural analysis, pipe plans, QC / QA documents, delivery notes, photos, etc.). These documents can be transferred to the
client after completion of the jacking process.

JCPipe

JCPipe – Quality assurance in pipe jacking / microtunnelling

Adapted to the project requirements and the pipe materials used, Jackcontrol AG provides the optimum monitoring system for every pipe jacking or microtunnelling project. Thanks to a modular design, comprehensive real-time monitoring of the pipe structure during the jacking process is possible for all commonly used combinations of jacking pipe and pressure transfer media. Within the same drive, different pressure transfer media can also be used (so-called hybrid method). For the software set-up,
all current standards used in pipe jacking can be taken into account, e.g. DWA-A 125 and 161, EN 1916, SIA 195, CPAA, PJA, etc.
Spannungsverteilung und resultierende Vortriebskraft aus Holzwerkstoff
 Spannungsverteilung und resultierende Vortriebskraft Hydraulische Fuge
Comparison of pipe eccentricity for wooden ring (left) and hydraulic joint (right).
Jack Director®
MSSTUnIS
3D/BIM
MSS Stand-alone Software
MSS has a modular design: While the Basic Package includes basic services that can be applied to almost any Pipe Jacking and Microtunneling project, the other MSS service packages can be activated according to the following overview of project requirements.

MSS.on

Herrenknecht AG and Jackcontrol AG join forces for a smart add-on for the Herrenknecht.Connected platform:

Address

Jackcontrol AG
Buchholzstrasse 50 | 8750 Glarus | Switzerland
Telefon +41 (0)55 650 20 20
info@jackcontrol.com | www.jackcontrol.com

Complete catalogue

Complete catalogue 2022/2023